Glossy Metallic Black Vinyl Car Wrap K-1801

Detail Description:

• Metallic Black Vinyl Car Wrap, fallen into the hard series at a glance. Mysterious pure black with gold flash particles, under the reflection of sunlight, like black paint shining stars, hormonal sense burst, is a must-have for men.

• The Car Wrap has no irritating odor,clear and orderly air guide groove,and good air permeability.
• Less orange peel,uniform color and full luster on the car effect.
• The thickness of the product is 6.7mil.After blowing with hot air,it can be softened and stretched, and the color is uniform and unchanged.
• High hardness of product texture,not easy to leave scratches.

Main Functions:

• Kakawrap is a brilliant choice for any occasion. In addition to cars, it can be used in car interiors, fenders, bicycles, electronics, kitchen cabinets and more.
• This can be used to give the bodywork or parts of your interior a fresh new look while helping protect the car's paintwork in the process. The wrap is available in various sizes, shapes, and profiles to suit any size of the vehicle.

Tips:

• For normal use, kakawrap provides a two-year warranty.
• If you require any other details or would like a quote for any sizes that aren't listed, please contact us.

Click for more:

Sparkle Black Vinyl Car Wrap K-1606

Tips and precautions for car wrap application:

• We recommend using a tack reducer for flat panels,and installation by at least two people/panel.
• The protruding parts of the vehicle body should be cut and fixed first.
• When heating, it can only be heated up to 50°C, and it should not be over-stretched, otherwise there will be color difference and peeling, especially for solid-color car wraps.
• Apply soap and water over the squeegee felt to avoid scratches.
• The car wrap must not be sprayed with water, only the transparent car cover needs to be sprayed with foam water.
• Let the film relax (heat and cool) before applying it to the depressions, and apply the adhesion promoter to the deep grooves.
• In the early stage after construction, the adhesion of the car wrap is low, so do not touch it, especially the edge parts.
• After applying the modified color film, there is a possibility of subsequent generation of bubbles or blisters, which is a normal phenomenon and will naturally disappear after 10-20 days.
• Car washing should be carried out after the car wraps is dry (about three days later), and do not spray a water gun at the joint between the film and the car paint.The best storage environment for the vinyl car wrap is 10-20°C, and the car should be kept away from direct sunlight, otherwise it will accelerate aging.
• If you are a beginner in retrofitting, it is not recommended to disassemble too many body parts.