Metal Paint Combat Grey Vinyl Car Wrap K-6003

Detail Description:

• Metal paint combat grey vinyl car wrap has always been a favorite color, classic and durable, simple atmospheric gray with some hard silver will achieve this super bright metal combat gray overbearing, combat breath full set off the lines of your car more smooth and hard, this is a low-key and not simple gray.

• The Car Wrap has no irritating odor,clear and orderly air guide groove,and good air permeability.
• Less orange peel,uniform color and full luster on the car effect.
• The thickness of the product is 6.7mil.After blowing with hot air,it can be softened and stretched, and the color is uniform and unchanged.
• High hardness of product texture,not easy to leave scratches.

Main Functions:

• Kakawrap is a brilliant choice for any occasion. In addition to cars, it can be used in car interiors, fenders, bicycles, electronics, kitchen cabinets and more.
• This can be used to give the bodywork or parts of your interior a fresh new look while helping protect the car's paintwork in the process. The wrap is available in various sizes, shapes, and profiles to suit any size of the vehicle.

Tips:

• For normal use, kakawrap provides a two-year warranty.
• If you require any other details or would like a quote for any sizes that aren't listed, please contact us.

Click for more:

Matte Laser Grey Vinyl Car Wrap K-3015

Tips and precautions for car wrap application:

• We recommend using a tack reducer for flat panels,and installation by at least two people/panel.
• The protruding parts of the vehicle body should be cut and fixed first.
• When heating, it can only be heated up to 50°C, and it should not be over-stretched, otherwise there will be color difference and peeling, especially for solid-color car wraps.
• Apply soap and water over the squeegee felt to avoid scratches.
• The car wrap must not be sprayed with water, only the transparent car cover needs to be sprayed with foam water.
• Let the film relax (heat and cool) before applying it to the depressions, and apply the adhesion promoter to the deep grooves.
• In the early stage after construction, the adhesion of the car wrap is low, so do not touch it, especially the edge parts.
• After applying the modified color film, there is a possibility of subsequent generation of bubbles or blisters, which is a normal phenomenon and will naturally disappear after 10-20 days.
• Car washing should be carried out after the car wraps is dry (about three days later), and do not spray a water gun at the joint between the film and the car paint.The best storage environment for the vinyl car wrap is 10-20°C, and the car should be kept away from direct sunlight, otherwise it will accelerate aging.
• If you are a beginner in retrofitting, it is not recommended to disassemble too many body parts.