Glossy ST.Paulo Yellow Vinyl Car Wrap K-1124

How do I calculate the car wrap size based on the specific model?

Measure from the most protruding position of the front bumper to the most protruding position of the rear bumper, the distance between these two points is the body length.

• Multiply the length in feet by 3 plus 10 feet to get the size you need.
• Keep in mind that you may need extra material for repairs.
  Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

If you have any questions about dimensions, please contact us at 📫kakawrap@kakawrap.com

Detail Description:

• BMW M4 Original Color
• St. Paul Yellow is a clearer and more dynamic film than the previous Austin Yellow. The special thing about St. Paul Yellow Vinyl Car Wrap is that it is between green and yellow. The special thing about St. Paul Yellow is that it is between green and yellow, with the vigor of green and the sunny energy of yellow.
• The car wrap has no irritating odor,clear and orderly air guide groove,and good air permeability.

• Less orange peel,uniform color and full luster on the car effect.
• The thickness of the product is 6.7mil.After blowing with hot air,it can be softened and stretched, and the color is uniform and unchanged.
• High hardness of product texture,not easy to leave scratches.

Main Functions:

• Kakawrap is a brilliant choice for any occasion. In addition to cars, it can be used in car interiors, fenders, bicycles, electronics, kitchen cabinets and more.
• This can be used to give the bodywork or parts of your interior a fresh new look while helping protect the car's paintwork in the process. The wrap is available in various sizes, shapes, and profiles to suit any size of the vehicle.

Tips:

• For normal use, kakawrap provides a two-year warranty.
• If you require any other details or would like a quote for any sizes that aren't listed, please contact us.

Click for more:

Pure Metal Fluorescein Yellow Vinyl Car Wrap K-9212

Tips and precautions for car wrap application:

• We recommend using a tack reducer for flat panels,and installation by at least two people/panel.
• The protruding parts of the vehicle body should be cut and fixed first.
• When heating, it can only be heated up to 50°C, and it should not be over-stretched, otherwise there will be color difference and peeling, especially for solid-color car wraps.
• Apply soap and water over the squeegee felt to avoid scratches.
• The car wrap must not be sprayed with water, only the transparent car cover needs to be sprayed with foam water.
• Let the film relax (heat and cool) before applying it to the depressions, and apply the adhesion promoter to the deep grooves.
• In the early stage after construction, the adhesion of the car wrap is low, so do not touch it, especially the edge parts.
• After applying the modified color film, there is a possibility of subsequent generation of bubbles or blisters, which is a normal phenomenon and will naturally disappear after 10-20 days.
• Car washing should be carried out after the car wraps is dry (about three days later), and do not spray a water gun at the joint between the film and the car paint.The best storage environment for the vinyl car wrap is 10-20°C, and the car should be kept away from direct sunlight, otherwise it will accelerate aging.
• If you are a beginner in retrofitting, it is not recommended to disassemble too many body parts.